L'imprimante saute les étiquettes

+ More

L'imprimante imprime des étiquettes, mais une étiquette est ignorée entre chaque tâche d'impression.

NOTE

Si vous utilisez des étiquettes 2x1 ou 2x3 pour imprimer pour tous les modèles d'appareils, utilisez toujours un profil d'imprimante au lieu des paramètres hérités.

L'imprimante saute les étiquettes

Start

Sélectionnez votre modèle :

X Series

2.0

Fit

Lite

Vérifiez que la ligne noire est visible au dos de l’étiquette. Voir les étiquettes DateCodeGenie® pour référence.

En cas d'erreur, remplacez-la par une étiquette comportant des lignes noires correctes et réessayez d'imprimer.

See next solution

Vérifiez que la taille d'étiquette correcte est utilisée pour le profil d'imprimante.

See next solution

Effacer le tampon de l'imprimante.

Clean Buffer for DCG X Series Printers

If a DCG X Series Printer is skipping labels, it may be necessary to clear the printer buffer. These steps are for the instruction to clear the buffer for your DCG X Series (X2, X22, X23) model printer.

Steps:

1. Tap the square on the bottom of the tablet screen.

2. Locate the DateCodeGenie app and tap x or swipe left to close.

3. Set master power switch on the back of the device to the “O” position.

NOTE

If toggle switch is not available, power off by removing the power cable located on the back of device from the wall.

4. Open case cover.

5. Gently separate the two black arms.

6. Verify that labels are loaded correctly, see How to Load Labels in the X Model Device.

NOTE

Labels should be facing up with the the black lines facing down towards the printer.

7. Press the blue/black tab to release the lever of printer. Extend the labels over the edge of the opening and close lever to snap in place.

8. Remove major debris if present.

9. Toggle master power switch to illuminate green.

10. Pull half a label out of the printer and close the lid. The printer should advance and cut in between two labels on a black line.

11. Open the DateCodeGenie app and test print.

For additional assistance see Contact & Support

See next solution

Télécharger les mises à jour sur l'appareil

How to Download Updates on the App

Downloading updates ensures the app has the most accurate data for printing and alerts you when a new version is available to download.

WARNING

Internet connection is required, see Connect Device to Wi-Fi or Connect Device to Ethernet.

NOTES

Portal administrators and managers can allow staff the app permission to download updates, see Allowed to Download Updates Permission
Time for downloading updates varies depending on internet speed, amount of data to update, and length of time from last download.

Last updated time is displayed on the app notification bar.

There are four ways to download updates:

1. App Login Screen

1. Tap Download Updates on the app login screen.

2. A green spinning circle icon will display and continue to spin while downloading. The screen darkens and is inactive.

3. The Sync Complete will display briefly at the bottom of app login screen that download is complete and active.

2. Navigation Options

1. Tap the navigation button (three-line icon).

2. Tap Download Updates.

3. A green spinning circle icon will display and continue to spin while downloading. The screen darkens and is inactive.

4. The Sync Complete will display briefly at the bottom of app dashboard that the download is complete and active.

3. Download Button

1. Tap download button (red clockwise circle arrow icon), if displayed.

2. A green spinning circle icon will display and continue to spin while downloading. The screen darkens and is inactive.

3. The Sync Complete will display briefly at the bottom of app dashboard that download is complete and active.

4. Automatically Download Updates

Require staff to manually download updates before logging into the app following a set period of inactivity. Automatic app downloads are not available.

See Automatically Download Updates on the App

See next solution

Pour une assistance supplémentaire, voir Contact et assistance

Vérifiez que la ligne noire est visible au dos de l’étiquette. Voir les étiquettes DateCodeGenie® pour référence.

En cas d'erreur, remplacez-la par une étiquette comportant des lignes noires correctes et réessayez d'imprimer.

See next solution

Si vous utilisez des étiquettes de 2 pouces, vérifiez que le guide du rouleau d'imprimante est en place.

See next solution

Vérifiez que la taille d'étiquette correcte est utilisée pour le profil d'imprimante.

See next solution

Effacer le tampon de l'imprimante.

Clear Buffer for DateCodeGenie 2.0

Model discontinued.

If a DCG 2.0 Printer is skipping labels, it may be necessary to clear the printer buffer.

Steps:

1. Tap the square on the bottom of the tablet screen.

2. Locate the DateCodeGenie app and tap x or swipe left to close.

3. Set power switch on the front of the printer to the “O” position.

4. Open case cover.

5. Press the printer release button to open.

6. Verify that labels are loaded correctly, see How to Load Labels in the 2.0 and Fit Model Devices.

7. Check that the roll guide to the right of the labels is in place.

8. Remove major debris if present.

9. Set power switch on the front of the printer to the “I” position.

10. Pull half a label out of the printer and close the lid. The printer should advance and cut in between two labels on a black line.

11. Open the DateCodeGenie app and test print.

See next solution

Téléchargez les mises à jour sur l'appareil.